Behringer NX3000D 3000W Power Amplifier with DSP

Behringer NX3000D


Behringer NX3000D is a stereo power amplifier with high-performance DSP capable of delivering 440W of peak power per channel into a pair of 8-Ohm speakers, and in bridge mode, up to 1500W of peak power into an 8-Ohm speaker.

RM 1,XXX


Behringer NX3000D 3000W Power Amplifier with DSP

Product Highlights

  • 2 x 440W at 8 Ohms (Peak)
  • DSP with 24-Bit/96 kHz Converters
  • High-Density Class-D Technology
  • Lightweight at 7.9 lb
  • SmartSense Impedance Compensation
  • Stereo and Bridged Modes
  • 20 Hz to 20 kHz Frequency Response
  • Balanced XLR-1/4" Combo Inputs
  • Twist-Lock Output Connectors
  • Control and Monitor Via USB

Behringer NX3000D Overview


Lightweight (at 7.9 lb) and compact, the rackmountable Behringer NX3000D is a stereo power amplifier with high-performance DSP capable of delivering 440W of peak power per channel into a pair of 8-Ohm speakers, and in bridge mode, up to 1500W of peak power into an 8-Ohm speaker. It employs SmartSense loudspeaker impedance compensation technology combined with a switch-mode power supply and zero-attack limiters to provide a 20 Hz to 20 kHz, linear frequency response with noise-free audio and fast transient response, at maximum output power, into any speaker load impedance.

The NX3000D features cool-running, high-density Class-D technology with near-zero thermal buildup, and an independent DC, LF, and thermal overload protection on each channel, which together protect the amplifier from shutting down and interrupting your show. A continuously variable speed fan and ventilation openings with back-to-front air flow further prevent overheating.

The amplifier offers built-in DSP with 24-bit/96 kHz converters, which ensure signal integrity with a broad dynamic range. The DSP section features delay, crossover, EQ, and dynamics processing. The security settings are lockable to prevent unwanted changes. The unit has a rear-panel USB port that allows setup, control, and monitoring from a computer with Behringer's free remote software (available separately). The amplifier's LCD display offers a convenient way to perform setup and adjustment tasks without a computer.

Simple to operate, the NX3000D's front panel is equipped with two detented and illuminated gain control knobs for precise level setting. The back panel houses two XLR-1/4" combination input connectors compatible with any line-level, balanced and unbalanced sources. Twist-lock speaker connectors provide reliable connections to your speaker cables.

Similar Products

RM -

Crown CTS2000BLU Powered Amplif...

RM 3,XXX

Audio Center DA6.2 2x560...

RM 1,XXX

Audio Center VA601 Power...

RM 2,XXX

Crown XLS1000 DriveCone Stereo ...

RM -

Crown XLC2800 2x440W Power Ampl...

RM -

Crown DCI8 600ND 8x600W Network...

CONTACT US