JBL C62P Pendant Speaker (Unit)



Frequency Response (-10 dB)

150 Hz – 20 kHz


Frequency Range (±3 dB)

200 Hz – 17 kHz


Power Capacity

50 Watts Continuous Program Power (2 hrs)
25 Watts Continuous Pink Noise (2 hrs)
30 Watts Continuous Program Power (100 hrs)
15 Watts Continuous Pink Noise (100 hrs)


Nominal Sensitivity

87 dB (4.0 V, 1 W)
84 dB (2.83 V)


Nominal Coverage Angle

140° (+25°/-50°)


Directivity (Q)



Directivity Index (DI)

6.2 dB


Rated Maximum SPL @ 1m

97 dB continuous pink noise, 103 dB peak


Rated Impedance

16 ohms (no transformer taps)


Recommended High-Pass Frequency

150 Hz


Transducer: Driver

60 mm (2.5 in), polypropylene-coated paper with pure butyl rubber surround, 20 mm (¾ in) copper clad aluminum voice coil with vented Nomex® coil-former.


Enclosure Material

High impact polystyrene



Zinc-plated steel grille with powder-coat finish, foam backing (removable
for painting)



Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating.



Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.



Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating
of 45 kg (99 lb).


Safety Agency Ratings

Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.



128 mm (5.1 in) diameter x 121 mm (4.8 in) height to top of cabinet. 141 mm (5.6 in) to top of suspension bracket.