Proel DMH-8XL, 8pcs Microphone Drum Kit

Proel DMH-8XL


Package for miking up a 8-piece drumset, includes: DM12 1pc, DM1 4pcs, CM602 3pcs, APM47 4pcs. Convenient ABS carrying case included.

RM 1,XXX


Package Consists of:
1 x DM12 Kick Drum Mic.
4 x DM1 Snare/Tom Mics
4 x APM47 Drum Clips (for DM1)
3 x CM602 Condenser Mics for Hi-Hat/Overheads with stand clips
1 x ABS foam lined, compartmentalised case.

Features and Specifications:

DM12 Kick Drum Mic.
- Super cardioid pick-up pattern for maximum sound with minimal feedback.
- Fast, transient response for modern punchy bass drum sound.
- Low frequency extension down to 50hz.
- Insternal shock mount for minimal stand/stage noise.
- Durable metal construction because stage microphones have a hard life!
- Hardened steel mesh grill.

Specifications:
Transducer Type: Moving Coil
Polar Pattern: Super-cardioid
Frequency Response: 50hz - 16khz.
Sensitivity: -58db
Maximum SPL: 152db
S/N Ratio: >65db
Impedance: 400 ohm
Connector: 3 pin male XLR.
Weight: 320g.
Dimensions: Length: 105mm x Diameter: 65mm.

DM1 Clip-On Snare/Tom Mic. 
- Cardioid pick-up pattern for maximum sound with minimal feedback.
- Quick and easy rubberised clip for fast and easy mounting and positioning
- Cable strain relief prevents the cable hanging down and trying to pull the mic off the drum.
- Internal shock mount minimises stage rumble/noise.
- Hardened steel mesh grille.

Specifications:
Transducer Type: Moving Coil
Polar Pattern: Cardioid
Frequency Response: 50hz - 16khz.
Sensitivity: -55db
Maximum SPL: 135db
S/N Ratio: >65db
Impedance: 200 ohm
Connector: 3 pin male XLR.
Weight: 145g.
Dimensions: Length: 85mm x Diameter: 55mm.

CM602 Condenser Microphone for Hi-Hat and Overheads.
- Permanently polarized condenser capsule.
- Cardioid polar pattern
- Light and rugged construction
- High SPL for close miking on stage.

Transducer type: Backplate Electret condenser.
Polar pattern: cardioid
Frequency response: 30Hz-20kHz
Sensitivity: -40 dB ± 2 dB
Maximum SPL for 0.5% THD: 135 dB
Self Noise: 22 dB-A
S/N Ratio: >70dB
Nominal Impedance: 200 Ohm
Reccommended Load Impedance: 500 ohm
Phantom power: 9-52VDC Phantom
Current drain: 3 mA.
Connectors: 3 Pin Male XLR
Colour: black
Accessories: Mic clip

CONTACT US