JBL CBT 100 LA LS Column Speaker

JBL CBT 100 LA LS


RM7,600.55
*Price is inclusive of GST 0%



Frequency Range (-10 dB)

120 Hz – 20 kHz

Coverage Pattern

Vertical:
Narrow Mode: 15° (2 kHz - 16 kHz) (±10°)
Broad Mode: 40° (1 kHz - 16 kHz) (±10°)
Horizontal: 150° (ave, 1 kHz – 4 kHz, ±20°)

Sensitivity (2.83V@ 1m)

Narrow: (speech mode) 96 dB (2 kHz - 14 kHz )
             (music mode) 93 dB (300 Hz - 18 kHz)
Broad: (speech mode) 93 dB (2 kHz - 14 kHz)
             (music mode) 90 dB (300 Hz - 18 kHz)

EN54 Sensitivity (@ 4m)

76 dB (per EN54:24 spectrum and measurement conditions at 4 meters, set at broad/music mode.)

Nominal Impedance

8 ohms (in Thru mode)
15w@70v; 30w@100v Tap = 333Ω
30w@70v; 60w@100v Tap = 167Ω 
60w@70v; 120w@100v Tap = 83Ω 
120w@70v; N/C@100v Tap = 42Ω

Power Capacity
(8 ohm setting)

325 W (1300W peak), 2 hrs
200 W (800W peak), 100 hrs

Max SPL

Narrow: (speech mode) 121 dB cont ave (127 peak)
            (music mode) 118 dB cont ave (124 peak)
Broad: (speech mode) 118 dB cont ave (124 peak)
            (music mode) 115 dB cont ave (121 peak)

EN54 Max SPL (@ 4m)

92 dB (per EN54:24 spectrum and measurement conditions, at 4 meters)

70V/100V Transformer Taps

120W, 60W, 30W, (15W at 70V only), and 8 thru, via switch

Reference Axis

Specification and measurement referenced on-axis vertically and horizontally to the center point of the speaker baffle.

Enclosure

Fiberglass reinforced ABS cabinet with UL94-5VB flammability rating, painted aluminum grille

Outdoor Capability

IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture and 200-hr ASTM G85 acid-air/salt-spray resistant.

Colors

Black or White (-WH)

Insert Points

18 M6 insert points on back panel.

Mounting

Included swivel (pan)/tilt wall bracket provides continuously variable +/-80 degree left-right swivel aiming (at no up/down tilt -- see Bracket Guide for maximum swivel range at various up/down tilt angles), continuously adjustable ±15 degree tilt, as well as 5 degree fixed increment points. Eighteen threaded mounting points located on back panel conform to industry standard rectangular 108 x 51 mm (4.25 x 2.0 in) pattern for OmniMount® 30.0 and other compatible third-party brackets. Threaded mounting points can be utilized for suspension.

Dimensions (H x W x D)

1000 x 98.5 x 153 (39.4 in x 3.8 in x 6.0 in)